.079" cl shrouded terminal strip header right angle SHTSHR-2 series 23 apr 07 major league electronics .079" cl shrouded terminal strip header pins per row SHTSHR-2 ordering information lf - - - lead free - xx d xx xx - xxx double polarized position 001 - 050 leave blank if not needed - 10 gold on contact area/flash on tail plating options - 10 gold on contact area/matte tin on tail - matte tin all over g gt t - gold flash over entire pin f 05 - 25 - xx 3.00 (.118) tail length pin options 2.54 (.100) 02 04 post option - a lock tight "lt" (optional) lt = with leave blank if not needed two tails per strip are crimped in opposing directions on or near the centerline. must have a minimum dimension of .050". recommended hole size of .040". 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com -40c to +105c 500v ac/dc operating temperature dielectric withstanding 1 amp current rating 20 mohms max. 1000 mohms min. copper alloy contact resistance insulation resistance contact polyester ul 94v-0 nylon 6t insulator mates with: ids-2 products cut to specific sizes are uncancellable/nonreturnable parts are subject to change without notice
.079" cl shrouded terminal strip header right angle s ht s hr-2 s erie s 23 apr 07 revisions revision b - (30th april 2010) amendment to current ra ting from 2 to 1 amp 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com
|